Look at the bottom of the SP Flash Tool interface. A red bar should appear, quickly followed by a yellow progress bar indicating active partition writing. Release the volume button once the yellow bar starts filling up. Step 5: Finalization
+-------------------------------------------------------------+ | SP FLASH TOOL v5.x | +-------------------------------------------------------------+ | Download-Agent: [ MTK_AllInOne_DA.bin ] | | Scatter-loading: [ MT6735M_Android_scatter.txt ] | +-------------------------------------------------------------+ | Location | Name | Address | File | +------------+------------+------------+----------------------+ | [x] | preloader | 0x00000000 | preloader_huawei.bin | | [x] | logo | 0x00a00000 | logo.bin | | [x] | boot | 0x01200000 | boot.img | | [x] | system | 0x04c00000 | system.img | +-------------------------------------------------------------+ Step 4: Selecting the Flashing Mode
Huawei_LUA-L02_MT6735M_Repack_Done_Dead_Hang_Logo_Fix.zip
: Install the MTK USB VCOM Drivers on your PC to ensure communication with the device while it is completely powered down.
Locate the field, click "Choose," and navigate to the SP Flash Tool folder to select the default MTK_AllInOne_DA.bin file. Look at the bottom of the SP Flash Tool interface
You can now safely unplug the USB cable from your Huawei phone. 🔄 Post-Flash Setup & First Boot
Note: This specific repack ensures compatibility with MT6735M and fixes the boot loop.
The following guide provides technical information for recovering a Huawei Y3II (LUA-L02)
| Partition | File Name (Typical) | Purpose | |-----------|----------------------|---------| | Preloader | preloader_lua_l02.bin | Initial bootloader (CPU init, DRAM init) | | Bootloader | lk.bin | Little Kernel – Fastboot mode | | Boot | boot.img | Kernel + Ramdisk | | Recovery | recovery.img | Stock recovery (or TWRP) | | System | system.img | Android OS (main firmware) | | Cache | cache.img | Temporary system data | | Userdata | userdata.img | Factory reset data | | Tee | tee1.img , tee2.img | Trusted Execution Environment | | Logo | logo.bin | Huawei boot splash screen | 🔄 Post-Flash Setup & First Boot Note: This
: Use this only if "Download Only" fails or if you are changing versions.
A red bar will appear first, followed by a yellow progress bar. Once finished, a "Download OK" green circle will pop up.
Download the verified Huawei LUA-L02 MT6735M Firmware Flash File Repack . Ensure it contains the MT6735M_Android_scatter.txt file.
: The phone repeatedly restarts after showing the logo. This is a common issue
Disconnect the phone and re-insert the battery if it was removed. Power on the device. The first boot after a flash can take 5 to 10 minutes as it initializes the new system If the phone is still stuck, enter Recovery Mode (usually Power + Volume Up) and perform a Wipe Cache Partition Factory Reset for the MT6735M scatter file or a driver installation guide for your operating system?
Navigate inside your SP Flash Tool folder and double-click flash_tool.exe to open the interface.
Is your stuck on the Huawei logo, constantly rebooting, or completely dead after a failed software update? This is a common issue, often referred to as a "soft brick," where the Android system partition is corrupted.