Guide the timing belt over the crankshaft pulley, oil pump pulley, water pump pulley, and camshaft pulley. Check that belt tension is uniform on the drive side.
Since official factory service manuals are copyrighted and cannot be reproduced directly, I have created a comprehensive for the Toyota 5A-FE engine.
The 5A-FE is an interference engine. If the timing belt breaks, the pistons will strike the valves, causing severe engine damage. Replace every miles) or as specified in your manual. toyota 5afe engine service manual new
SAE 10W-30 or 5W-30 (API grade SG or higher). 5W-30 is preferred for cold climates.
Toyota 5A-FE Engine Service Manual: A Comprehensive Guide to Maintenance and Repair Guide the timing belt over the crankshaft pulley,
Resistance should sweep smoothly without jumps from 0.2kΩ to 5.7kΩ as the throttle opens.
Change every 5,000 to 10,000 km (approx. 3,000–6,000 miles). Use SAE 5W-30 or 10W-30 . Timing Belt: The 5A-FE is an interference engine
Loosen the timing belt tensioner bolt, push the tensioner pulley away from the belt, and temporarily tighten the bolt to hold it in place. Slide the old belt off.