Skip to main content

Toshiba Network Camera User Login Ro Jun 2026

Add the camera’s IP address to your browser's list in the Internet Options menu.

If the default credentials do not work and you have forgotten the custom password, you must perform a hardware reset. Locate the physical reset button on the camera body, hold it for at least 10–15 seconds (some models may require up to 60 seconds) while the device is powered on to restore factory settings.

: The camera may support "Device Account Mode," which allows for auto-login for specific functions like viewing only. Security Recommendation : Always change the default

If you need to configure the camera, you require Administrator access.

: Perform a hardware factory reset to restore default credentials. toshiba network camera user login ro

). The standard factory static IP address assigned to these devices is .

If you’re trying to access a Toshiba network camera (IP surveillance model) and need the login credentials, here are the most common defaults:

: Never leave the default root password active on a production network.

rtsp://ro_user:view123@192.168.1.120:554/stream1 Add the camera’s IP address to your browser's

Need more help? Leave a comment below with your exact Toshiba camera model number (e.g., IK-WB15A, IPR-8EX) for specific firmware guidance.

Log in to the web panel using your primary administrator credentials ( root / ikwb ).

Type http://[camera_IP_address] into the address bar, for example http://192.168.1.120 . Press Enter.

If a Read-Only user loses their password, it cannot be recovered directly from the login page. : The camera may support "Device Account Mode,"

For many legacy Toshiba IP cameras (such as the IK-WB series), the default root and guest credentials are often the first step for troubleshooting access: Root/Admin Credentials Guest/Read-Only Credentials Some models allow a

Open the navigation menu on the left side of the screen and choose . Click on the sub-menu option labeled Changing ID/Password . Locate the User Information section. Switch the feature marked Login Restriction to OFF .

Once you change the administrator password, there is no password recovery feature from the vendor. If you forget the new password, you will be locked out of the camera's settings. It is essential that you store this new password somewhere safe.