Rok Power Washer Instructions — New

: Connect the threaded end of the 25-foot high-pressure hose to the water outlet on the machine and the other end to the base of the trigger gun.

If you have an electric model, wipe down the power cord and store it on its designated hook. Long-Term Winterization and Storage

Once the engine starts, smoothly move the choke lever back to the "RUN" position (open). Selecting and Changing Nozzles rok power washer instructions new

Do not leave the pump under pressure. Turn off water and squeeze the trigger to drain. Winter/Long-term

Thread the spray lance (extension wand) into the front threads of the trigger gun. Twist clockwise until tight. : Connect the threaded end of the 25-foot

Improper shutdown can leave residual high pressure trapped in the hose, creating a hazard. Follow these steps to shut down safely:

Allow the soap to sit on the surface for 3–5 minutes to break down grime, but do not let it dry completely. Selecting and Changing Nozzles Do not leave the

Most pressure washer failures occur due to improper storage. Follow these steps every time you finish using the machine.