Proteus Par5500 Manual Work -

Understanding the physical layout is critical before operation.

Wash the element in a solution of household detergent and warm water, then rinse thoroughly.

Attach a can of pressure washer pump saver/antifreeze to the water inlet. Spray until the fluid exits the high-pressure outlet.

Press START immediately upon powering up. You control the resistance level manually throughout the workout using the Up/Down keys. proteus par5500 manual

The unit features a patented dust-free concealed roller to maintain smooth movement and prevent debris from damaging the rail. Fitness Superstore digital PDF copy

Continuous-duty high-torque DC motor (typically 2.5 to 3.0 HP continuous). Speed Range: 0.8 to 18 km/h (approx. 0.5 to 11 mph). Incline Range: 0 to 15% motorized power incline.

Its key features include:

Keep the trainer indoors, away from moisture, high humidity, and direct sunlight. Do not store it in a garage or uninsulated patio. User Safety

Make sure absolutely no extension cords or appliances are plugged into the control panel before starting. Starting under load can damage the generator and your electronics. 4. How to Start and Stop the Proteus PAR5500

Move the located above the air filter to the CLOSED (or START) position. Note: If the engine is already warm, leave the choke in the OPEN/RUN position. Spray until the fluid exits the high-pressure outlet

: Features a built-in receiver compatible with chest belts (e.g., Polar) for wireless monitoring. Assembly & Maintenance

If your Proteus PAR5500 will sit idle for more than 30 days, proper storage preparation prevents fuel system deterioration and corrosion.

Clean the air intake on the flywheel to prevent dust buildup. The unit features a patented dust-free concealed roller

Adjusts the deck incline angle by 1% increments.