Work on a non-conductive surface (like a wooden table). Wear an anti-static wrist strap or regularly touch a grounded metal object to discharge static electricity.
Unscrew all marked screws holding the shield to the inner frame.
Locate and remove all the screws on the rear plastic casing. Be sure to check underneath the stand or any rubber footpads, as manufacturers often hide screws in these locations.
Carefully lift the fan out to clean it or apply new thermal paste to the CPU. Ensure all ribbon cables are seated correctly and locked. Reinstall the metal shielding. acer aspire zc610 disassembly full
Only proceed if you need to replace the screen, digitizer, or front bezel.
Gather the following before you begin:
If you removed the heatsink, always clean off the old paste and apply a fresh, pea-sized drop of high-quality thermal compound to the center of the CPU before reinstalling the copper pipes. Work on a non-conductive surface (like a wooden table)
: A towel or anti-static mat to prevent scratching the screen while face-down. Step 1: Removing the Stand and Outer Screws Preparation
Locate the small M.2 or Mini-PCIe wireless card. Carefully pry off the gold-tipped antenna cables (usually one black, one white) using a plastic tool or tweezers. Remove the single screw holding the card down, let it tilt up, and pull it from its slot. Step 5: Removing the Cooling Fan and Heatsink
Unplug the external power brick from the DC jack. Locate and remove all the screws on the rear plastic casing
The wide LCD LVDS/eDP display cable (often secured by a flip-lock latch or a piece of clear adhesive tape). Inverter/backlight power cable. Front panel audio, USB, and power button ribbon cables. Internal speaker cables.
Reassembly tip: Before sealing everything, power on the PC with the LCD resting in place to ensure proper display and touch function.