Bags of crystal-growing powder (typically ammonium phosphate or potassium ferricyanide) in various colors such as blue, red, and pink.
Problem 3: The crystal stuck to the bottom of the plastic cup.
Once bone-dry, place your creation directly onto the center of the Light-Up LED Display Base . Pop in the required batteries, turn off the room lights, and watch your crystal cluster radiate light from the inside out! 🔍 Troubleshooting Guide Problem: No crystals formed after 3 days. Pop in the required batteries, turn off the
Measure exactly 200ml of distilled water. Heat the water until it reaches a rolling boil (100°C / 212°F). Tap water contains minerals that interfere with the crystallization process, so distilled or deionized water is highly recommended for optimal results. Step 3: Mix the Solution
Stir continuously for using the stirring stick. The powder must completely dissolve until the liquid is entirely clear. If crystals remain at the bottom, they will disrupt the growing process later. Heat the water until it reaches a rolling
Slowly add the powder while stirring constantly.
The final step is to illuminate your crystals with the UV light. Follow these steps: Step 2: Mix the Solution
While the water is still hot, snip open the packet. Pour it into the liquid and stir vigorously for another 60 seconds to ensure the phosphorescent particles distribute evenly. Step 5: The Critical Cooling Period (Do Not Skip!)
Boil fresh, clean water. Do not use lukewarm tap water, as the chemical powder will not dissolve completely. Adults should handle this step to prevent burns. Step 2: Mix the Solution