Ultimate Guide to UFI Box Setup (Latest Version) – Insights from GSM Forum

The software will automatically detect the internal smart card serial number.

Follow this exact installation sequence to ensure all database paths and registry entries are correctly mapped.

: Use the provided USB cable to connect the UFI Box to a USB 2.0 or 3.0 port on your computer.

Under : Microsoft Usbccid Smartcard Reader (or similar entry indicating the internal card reader is recognized).

Select the subfolder matching your OS architecture ( x86 for 32-bit or x64 for 64-bit) and click .

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Confirm the installation if Windows prompts you with a security warning.

: Ensure no other mobile repair software (such as Mi Flash Tool or Samsung Smart Switch) is running in the background and hijacking the ADB interface.

: The latest setup package (e.g., v1.6.0 or higher) containing the main interfaces.

Ensure your ISP jumper wires are shorter than 10 cm. If the box cannot supply enough current, connect a USB cable to the phone's charging port during the operation to power the motherboard logic board natively via the phone battery circuit.

Right-click the icon on your desktop and select Run as Administrator .

Keep the default installation path (usually C:\UFI ) to prevent directory mapping errors. Click Install and wait for the files to extract. Step 3: Connect the Hardware Plug the UFI Box into a high-powered USB port on your PC.

This guide covers preparing, installing, and using the latest UFI Box software (UFI Box Repair Tool / UFI Box Client) for GSM repair tasks: read/write eMMC/UFS, boot repair, IMEI repair, FRP bypass, and chip-level servicing. Assumes Windows 10/11 PC, UFI Box hardware, USB cable, and target devices.