Centurion Cs 2000 Power Converter Manual Wiring Diagram -

In many CS 2000 units, the B+ terminal is internally connected to the DC fuse board via a copper strip or heavy gauge jumper. The B- terminal is internally bonded to the chassis ground bus.

This is the main 12V output. It feeds the 12V fuse panel.

has a dedicated wire (often Red) that runs directly to the positive terminal of your RV house battery to keep it charged. centurion cs 2000 power converter manual wiring diagram

The hum of the woods was quiet until Elias clicked his flashlight on, illuminating the yellowed, dog-eared pages of the Centurion CS 2000 Power Converter manual

Connects to the incoming shore power supply line and feeds the main circuit breaker. In many CS 2000 units, the B+ terminal

| Circuit Rating | Minimum Copper Wire Gauge | | :--- | :--- | | | 14 AWG | | 20A | 12 AWG | | 30A | 10 AWG | | 50A | 6 AWG |

Here is a quick overview of the key specifications: It feeds the 12V fuse panel

Uses shore power to run 12V loads and charge the battery. Off: All 12V power is disabled. Battery: Draws 12V power from the battery only.

Safety Ground. Connects to the green ground terminal bar, which must be bonded to the RV chassis frame. 12V DC Low Voltage Side (Right/Fuse Block Panel)