Uconnect Software - Version 18.45.01

This article is for informational purposes only. Always refer to your vehicle’s owner’s manual and official Stellantis communications before performing any software update. The author is not responsible for any damage resulting from improper installation.

If you own one of these vehicles and are experiencing incorrect times, navigation errors, or system freezes, this update is critical. How to Install Uconnect Software Version 18.45.01

Typically, Uconnect version 18.45.01 targets model years equipped with the Uconnect 4C or 4C NAV (RA4/UAS/UAQ) 8.4-inch radios . Common models that utilize this firmware include: Jeep: Grand Cherokee, Cherokee, Wrangler (JL), Compass Ram: 1500, 2500, 3500 (Classic and New Body styles) Dodge: Charger, Challenger, Durango Chrysler: 300, Pacifica Uconnect Software Version 18.45.01

Start the engine. Keep the engine running throughout the process to prevent the battery saver mode from shutting down the system.

If your system is currently running a very old version (e.g., 15.x), you may need to install an intermediate update (like 17.43.01) before you can successfully jump to . Uconnect® Software Update Center: For Stellantis Vehicles This article is for informational purposes only

is a critical, foundational firmware update released by FCA/Stellantis for vehicles equipped with RA3 (8.4-inch display without navigation) and RA4 (8.4-inch display with navigation) infotainment units. Rolled out to address system-wide GPS rollover issues and layout infrastructure for future navigation map updates, this particular software version targets model years spanning 2013 through 2017 across Chrysler, Dodge, Jeep, and Ram vehicles.

Here are the key features and details for (commonly found on Chrysler, Dodge, Jeep, Ram vehicles with the Uconnect 4 or 4C systems, around 2018-2020 model years): If you own one of these vehicles and

Failure to apply this update or newer versions can lead to persistent problems, such as:

If you have questions about the update, it is recommended to contact your local dealership to verify if your system software is up to date.

Fixes gridline disappearing bugs on the rear camera display. How to Check Your Current Uconnect Version

Download the Uconnect 18.45.01 update file (usually a .zip or .iso file).