| Mode | Application | Typical time | |------|-------------|--------------| | | Metal grade identification | 5–10 sec | | Plastics | RoHS screening (Cd, Pb, Br) | 60–120 sec | | Soil | EPA Method 6200 | 90–180 sec | | Mining | Ore grade estimation | 60 sec | | Light Elements | Mg, Al, Si, P, S (requires helium purge) | 180 sec |
model, is a comprehensive guide covering radiation safety, analyzer assembly, and specific testing modes like alloy analysis.
Rechargeable Lithium-ion batteries providing hours of field use. 3. Step-by-Step Operating Instructions Niton Xlt 898 User Manual
Never initiate a test while the analyzer is pointed at yourself or others.
Press the power button. The system will undergo an automatic self-calibration (System Check). | Mode | Application | Typical time |
Features a high-performance gas-filled or Si-PIN detector designed to capture secondary X-rays emitted by the target sample.
Measurement times. Variable, user-definable. Alloy: recommended. measurement time: min 10 seconds. Standard Accessories. Lockable, International Equipment Trading Ltd. Thermo Niton XLT 898 Alloy XRF Analyzer - Karya Abadi Tech or wrong mode | Clean window
| Part | Part Number | |------|--------------| | Battery pack | NIT-BAT-XL898 | | AC charger | NIT-AC-12V | | RS-232 cable | NIT-CBL-232 | | Check sample kit | NIT-CK-898 | | Helium purge kit | NIT-HE-898 |
: Housed in a dust-proof and splash-proof injection-molded plastic case. 2. Operation & Interface
| Symptom | Likely Cause | Fix | |---------|--------------|-----| | No power | Dead battery | Recharge; check cradle contacts | | “Interlock error” | Window missing or safety shutter stuck | Replace window or contact service | | High counts / unstable | Cracked window | Replace Prolene film | | Low counts / long test time | Dirty window, thick paint, or wrong mode | Clean window; grind sample; switch to Alloy Plus | | Wrong alloy ID | Surface contamination or small sample | Clean sample; use workstand with masking | | Cannot connect to PC | Baud rate mismatch | Set 9600, N, 8, 1 on both XLt and PC |
