100 Instructions Portable | Equatech Universal Tv Wall Mount 32 To

Proper installation is critical to protecting your TV and your wall. Follow these step-by-step instructions to ensure a stable setup. 1. Preparation and Required Tools Before you begin, gather the following tools: Stud Finder (Essential) Electric Drill & Drill Bits Socket Wrench Set Tape Measure 2. Locate the Studs

Once the TV is centered, engage the locking mechanism or tighten the safety screws at the bottom of the brackets to prevent the TV from being knocked off the mount. Pro Tips for a Perfect Setup

: Drill holes using a 3/8" (10mm) masonry bit. Insert the plastic concrete anchors completely into the holes, then drive the lag bolts through the plate into the anchors. Step 4: Hang the TV on the Wall Plate Proper installation is critical to protecting your TV

I can provide customized advice to help you finish your installation safely.

Three mounting options including flat, 8-degree tilt, and 10-degree tilt for optimal viewing angles. Dimensions: H43 x W36.8 x D1.1cm. Preparation and Required Tools Before you begin, gather

Carefully lift the television up toward the wall plate.

vertical brackets to the back of your TV using the screws, washers, and spacers provided. Ensure they are tightened firmly, but avoid over-tightening, which can damage the television surface. 5. Hang the TV and Secure Insert the plastic concrete anchors completely into the

What you are mounting into (drywall with wood studs, concrete, or metal studs)? The exact brand and size of your television?

: Wood studs, solid concrete, or brick (Do not mount to bare drywall) Required Tools Stud finder (for wood stud installation) Bubble level (included in most Equatech kits)