Hanmatek Dos1102 Manual ((full)) Today

1 MΩ ± 2%, in parallel with 20 pF ± 3 pF Maximum Input Voltage: 400V (PK + DC, Peak) 2. Front Panel Layout and Control Definitions

Before diving into operation, the manual highlights the core specs that define the scope's limitations and strengths:

Before making any real-world measurements, you must match your probe's internal capacitance to the input channel of the scope. Failing to do this will result in distorted signal shapes (rounded edges or overshooting spikes). Turn on the DOS1102 and wait for the system to boot up. Connect your probe to the BNC input. Switch the physical slider on your probe handle to 10X . hanmatek dos1102 manual

Disclaimer: This article is for informational purposes. Always refer to the official Hanmatek DOS1102 manual for safety instructions and accurate operating procedures.

⚠️ : The DOS1102 is also sold under other brand names (e.g., Hantek, Zeeweii). However, the Hanmatek-specific manual matches the button layout and firmware version most closely. 1 MΩ ± 2%, in parallel with 20

Any specific or behavioral glitches you are seeing.

Can store at least 16 groups of waveforms and supports external U-disk storage (formatted to FAT32). Connectivity: Turn on the DOS1102 and wait for the system to boot up

The Hanmatek DOS1102 offers up to 32 types of automatic measurements. Press MEASURE to select options like:

Moves the entire waveform up or down on the screen. 3. Horizontal System (Time Base Controls) This zone controls the horizontal axis (Time).

Press the menu button and ensure the probe attenuation setting in the digital menu matches the physical switch ( 10X ).

The probe is under-compensated. Perfect Square: The probe is correctly compensated.