Orbitor Prospector 100 Metal Detector Manual [work] Jun 2026

Keep the search coil . The closer the coil is to the ground, the deeper it will penetrate, but try to avoid "bumping" the ground, which causes false signals.

The interface consists of two primary dials, a view meter, and a battery test button. Power / Volume Dial Turns the unit on/off and adjusts audio loudness.

Align the locking click-pin on the lower fiberglass shaft with the holes on the upper aluminum shaft. Orbitor Prospector 100 Metal Detector Manual

High Setting: Rejects most junk metals, accepting only highly conductive metals like copper and silver coins.

Turn the completely counter-clockwise to the All Metal position. Keep the search coil

A: The search coil is water-resistant, meaning it can safely be used in shallow fresh water, wet grass, and damp sand. However, the control box is not waterproof. Do not submerge the control box or expose it to heavy rain.

Insert the lower stem into the upper S-rod. Adjust the length so the coil rests flat on the ground when you stand erect. Tighten the locking collar. Power / Volume Dial Turns the unit on/off

The needle on the Prospector’s analog face didn’t just jump; it pinned itself against the far right side, trembling. In his ears, the drone dissolved into a rhythmic, metallic clicking.

To get the best performance out of your device, follow this systematic testing and hunting workflow. Step 1: The Air Test (Bench Testing)