Richmond 5v40-7 Water Heater Specs Jun 2026
The unit requires 5.0" – 10.5" W.C. gas pressure. A undersized gas line (e.g., 1/2" over 50+ feet) will cause poor performance. For runs over 20 feet from the gas meter, consider a 3/4" supply line.
: If the water is not heating, the pilot flame and thermocouple are the first components to check. A steady pilot flame is necessary for the gas valve to remain open.
| Specification | Detail | |---------------|--------| | Energy Factor (EF) | 0.59 (pre-2015 standard) / UEF: 0.62 (Uniform Energy Factor) | | First Hour Rating (FHR) | 67 gallons | | Recovery Rate | 38.8 gallons per hour (at 90°F rise) | | Standby Heat Loss | ~4-5% per hour (typical for standard tank) |
Features a surface-mounted thermostat with a high-limit safety switch (ECO - Energy Cut Off). This allows homeowners to adjust the temperature setting (usually between 110°F and 170°F) and protects against overheating. richmond 5v40-7 water heater specs
The “tall” designation (60″ height) is useful when you have vertical space but limited floor area. It’s taller than a “short” 40-gallon (~50″), so measure your space.
A: On the rating plate, located near the gas control valve or on the side jacket. Serial number decodes to manufacture date (e.g., 1925 = 25th week of 2019).
Note: some retailers list this model as a Richmond/Rheem “lowboy” (short) 40‑gal electric product with SKU variants; exact element wattages and dimension tolerances can vary by submodel. The unit requires 5
: Often HUD-certified for manufactured housing and modular construction. Richmond Water Heaters Troubleshooting Common Issues
can recover up to 2.5 times faster than standard electric units, ensuring you rarely run out of hot water during back-to-back use Corrosion Protection:
Some users have reported that the pilot light can be finicky or go out due to thermocouple or ventilation issues. Parts Longevity: While the tank is durable, some reviewers at Home Depot For runs over 20 feet from the gas
: Features a "4-hole top" or side-mounted openings for easier access and fast installation in tight quarters.
are engineered for rapid heating, often featuring a recovery rate roughly 2.5 times faster than standard electric units. This high-input design makes it suitable for households with moderate to high hot water demands.
Based on manufacturer data and historical product listings, the key specs for the 5V40-7 include: 40 Gallons. Fuel Type: Propane (Liquid Petroleum Gas). BTU Input:
