Ms7860 Ver 12 Motherboard Specs [upd] Now

Supports up to 16 GB RAM (2 x 8 GB modules). Supported Clock Speeds: 1333 MHz and 1600 MHz natively. Expansion and Storage Slots

If you are shopping for a used MS-7860, verify the chipset type carefully, inspect the CPU socket for bent pins, and budget for a fresh CMOS battery—these boards are nearing a decade of service. For many builders, the extra $30–50 investment in a newer H110 or B250 platform with DDR4 support is money well spent. But if you have a compatible CPU and DDR3 memory already on hand, the MS-7860 VER 1.2 can still power a perfectly usable secondary system for years to come.

The is a proprietary Micro-ATX motherboard manufactured by MSI for HP ProDesk 400 G1 and G2 desktop series. Based on its H81 or H87 chipset, it supports 4th generation Intel Core processors and uses DDR3 memory. Core Technical Specifications Socket Type : Intel LGA 1150 (Socket H3). ms7860 ver 12 motherboard specs

Intel H81 Express Chipset or H87 (depending on the specific HP variant, with H81 being common in 400 G1). BIOS: AMI BIOS. 2. Memory Support (RAM) Memory Type: Dual-channel DDR3 SDRAM.

The heart of the MS-7860 is the . This chipset was built specifically for business environments, offering advanced manageability and security features that consumer-grade boards often lack. Socket Type: Intel LGA 1150 Chipset: Intel Q85 Express Form Factor: Custom Micro-ATX (Proprietary HP design) Bus Speed: 5 GT/s DMI2 2. CPU Compatibility Supports up to 16 GB RAM (2 x 8 GB modules)

The backplate layout is standard for entry-level boards of this era:

uses a proprietary HP power connector rather than the standard 24-pin ATX connector. 6-pin main power and 4-pin CPU power. For many builders, the extra $30–50 investment in

Up to 16 GB or 32 GB (Depending on 2-slot vs 4-slot variant configuration) SATA III (6.0 Gbps) and SATA II Network (LAN) Realtek RTL8151GH-CG Gigabit Ethernet (10/100/1000 Mbps) Audio Codec Realtek ALC221 High Definition Audio Processor & Chipset Architecture

The MS-7860 uses the form factor, measuring approximately 24.4 cm (9.6 inches) in width and depth, and 3.5 cm (1.4 inches) in height . This makes it compatible with any standard micro-ATX case, though you may need to supply your own I/O shield if purchasing a replacement board.