Pro Tools 10 requires an older but not too old iLok driver.
In the fast-paced world of audio production, the rule is simple: update or die. But there is a specific, strange intersection in tech history where an old piece of software met a slightly newer operating system, creating a "Goldilocks" zone of stability that still confounds users today.
Double-click the downloaded .dmg file to mount it on your desktop.
A member of the Avid Pro Audio Community confirmed this method worked perfectly for them: "it was a long process... but it worked! I'm up and running with a dual boot system. PT10 installed and running great on 10.7, and Logic X and everything else under El Capitan running very, very good." install pro tools 103 10 on high sierra
Pro Tools 10 requires a physical iLok 2 or iLok 3 USB smart key holding a valid Pro Tools 10 license.
The installer script blocks execution for two primary reasons:
Double-click the new file on your desktop. Pro Tools 10 requires an older but not too old iLok driver
Because the standard .pkg file will block you immediately, you must bypass the version check.
We are talking about installing on macOS High Sierra (10.13) .
If your needs are professional and mission-critical, consider investing in a newer version of Pro Tools or maintaining a dedicated boot partition with a natively supported operating system. For personal projects, experimentation, or legacy session access, the High Sierra workaround can provide a functional, if imperfect, solution. Double-click the downloaded
The stock Avid uninstaller will fail on High Sierra. Removal must be done manually. Step 1: Prepare the Pro Tools 10.3.10 Installer
Run the following commands to repair permissions (you may need to provide your password): sudo chown -R root:wheel /Library/Application\ Support/Digidesign sudo chmod -R 775 /Library/Application\ Support/Digidesign Step 5: Launching Pro Tools 10 Launch Pro Tools 10.
The most notable issue on High Sierra is the "blank menu" bug, where top-level menu text disappears when hovered over.
Once the installation is complete, re-enable SIP for system security. Restart into Recovery Mode ( Command + R ). Open . Type: csrutil enable and press Enter. Restart your Mac. Post-Installation Setup 1. Installing Necessary Drivers