Disco 240 Dmx Controller - Manual Link

Congratulations on purchasing the Disco 240 DMX Controller, a professional-grade lighting controller designed to make your lighting design and operation a breeze. This manual will guide you through the features, installation, and operation of your new Disco 240 DMX Controller.

: Shows current operational modes, bank numbers, and DMX values. 🔌 Initial Setup and DMX Addressing

Press and hold the Program button for three seconds until the indicator LED blinks.

The Disco 240 DMX controller is a versatile, budget-friendly lighting console designed to control intelligent stage lights like moving heads, scanners, and LED pars. Operating on the standard DMX512 protocol, it offers robust control over 240 channels, making it a favorite for DJs, small clubs, and mobile entertainers. disco 240 dmx controller manual

Typically a 9V–12V DC input (minimum 500mA) via an external power supply.

Move the to change positions, colors, gobos, or dimming attributes.

The Disco 240 DMX controller is a staple console for mobile DJs, small clubs, and stage lighting technicians. It offers 240 channels of DMX control, allowing you to manage up to 12 intelligent lighting fixtures with up to 20 channels each. Congratulations on purchasing the Disco 240 DMX Controller,

A chase is a sequence of scenes (up to 240 steps).

The Disco 240 features a standard 3-pin XLR output (both male and female connectors are usually present for daisy-chaining).

The Disco 240 is a standard 19-inch rack-mountable DMX controller capable of managing up to [1]. It allows for the simultaneous control of up to 12 intelligent lights (fixtures) , each with up to 20 channels [1]. Key Features: 🔌 Initial Setup and DMX Addressing Press and

Connect a 3-pin from the DMX OUT port of the controller to the DMX IN port of your first light.

: Toggles the 8 physical faders between Page A (Channels 1–8) and Page B (Channels 9–16), or Page C depending on fixture profiles.

: Controls how fast a chase transitions from one step to the next.

Double-check that your fixture's DMX address matches the controller's bank (001, 021, 041, etc.).