Equatech Universal Tv Wall Mount 32 To 100 Instructions ((exclusive)) Official

The "VESA" standard is a distance (in mm) between the four mounting holes on the back of your TV. For 32-100 inch TVs, this pattern can vary widely (e.g., 200x200mm, 400x400mm, or 600x400mm).

: Look at the four screw holes on the back of your TV. Measure the horizontal distance between the holes first, followed by the vertical distance in millimeters. The Equatech mount Go to product viewer dialog for this item.

: Check the hardware alignment every six months to verify that no structural shifting has occurred, especially if you are utilizing a full-motion articulating arm configuration.

This guide covers general Equatech universal mount instructions. Always read the specific manual included with your product, as minor variations exist between fixed, tilt, and full-motion models. equatech universal tv wall mount 32 to 100 instructions

Ensure your TV does not exceed 75 kg (165 lbs) .

If your TV has a curved back, use the provided spacers to create a flat surface for the brackets.

Having the right tools on hand before you begin will save you significant time and frustration. You will likely need: The "VESA" standard is a distance (in mm)

This is the most dangerous step for large TVs.

Use your level again to ensure the plate is perfectly horizontal before fully tightening the bolts. Step 4: Hang the TV

Attach the (bracket hooks) to the back of the TV, ensuring they are aligned vertically. Measure the horizontal distance between the holes first,

| Issue | Solution | |-------|----------| | Screws too long for TV | Use plastic spacers + shorter screws | | TV tilts forward | Tighten tilt bolts or add more spacers | | Studs not centered | Use the wall plate’s sliding brackets (if model has them) | | Mount doesn’t fit VESA 100×100 | This model starts at VESA 200×200 typically – check specs |

The mount provides three mounting options, which typically refer to various tilt and position configurations. For a 100-inch TV, it’s crucial to verify the total weight of your TV does not exceed the mount's 55kg limit.

The Equatech kit includes a variety of bolt diameters (M4, M6, M8) and lengths.