Free - Ericsson Mini Link Craft 22 Download Work

Right-click setup.exe or install.exe and select Run as Administrator .

Ericsson MINI-LINK Craft is a proprietary configuration and management tool for Ericsson's microwave transmission nodes (like the TN and CN series)

If you work for a telecom operator, your IT department or Internal Tools portal will usually have the specific version (e.g., 22.x) required for your network. ericsson mini link craft 22 download free

Craft 22 is designed for older but widely deployed MINI-LINK platforms, including:

After successful installation, follow this protocol to establish a local management session with a physical microwave node: 1. Physical Connection Right-click setup

The software tracks real-time performance metrics such as Received Signal Level (RSL), Transmit Power (Tx), and Bit Error Rate (BER). Built-in loopback tests help isolate faults between the local node, remote node, and the interconnecting cables. 3. Alarm and Fault Management

Connect a standard Cat5e or Cat6 Ethernet cable to your laptop. Alarm and Fault Management Connect a standard Cat5e

(Compact Node) Tailored for single-hop or small-site deployments (e.g., CN 210, 510).

10.0.0.1 or 192.168.0.1 (consult your operator's specific engineering guidelines). Laptop Static IP: Set to 10.0.0.10 or 192.168.0.10 . Subnet Mask: 255.255.255.0 or 255.255.0.0 . 3. Launching the Session Open Ericsson MINI-LINK Craft 22 .