Caraflo V200 Shower Instructions

is designed for easy disconnection to facilitate proper draining in holiday homes that are unoccupied during cold months Inlet Filters:

Screw the shower hose onto the central shower outlet. Use a washer to prevent leaks.

The most common issue users face is "cycling" water temperatures. Because the V200 relies on your vehicle’s boiler (Truma, Alde, or Whale), follow these steps for a consistent experience: caraflo v200 shower instructions

Understanding the physical footprint is essential for new installations or direct retrofits. Specification Dimension / Value 45mm (hole centres) Orientation Horizontal or Vertical installation Cartridge Length & Type 92mm length, Screw-in type Cartridge Material Plastic Nylon body, brass spindle Certifications NCC Certified, WRAS Approved, TMV2 Scheme Connections 20mm Tail Outlet, 45mm Tail Length Installation Instructions

Unscrew the shower hose from the bottom or side outlet of the V200 body. Shake out any trapped pools of water from the hose line and the shower head. is designed for easy disconnection to facilitate proper

Frozen water expands and can easily crack the internal valve of a Caraflo V200.

: Do not mix a gravity hot supply with a mains cold supply. Operating and Adjusting Temperature Because the V200 relies on your vehicle’s boiler

From the rear of the panel, screw on the backnuts. Tighten them firmly, but do not overtighten , as this can crack the plastic fittings or damage the panel. Connect Plumbing:

Drill or confirm two holes spaced exactly from centre to centre.

Shut off the primary water inlet to the caravan and turn off the water heater completely.