Enhanced/Dual Powered

Willem EPROM Programmer

User Guide  

 

Willem Package Item Image

Supported IC List

Installation & Configuration

Jumper Configuraton

Self Test Function

Software Interface

FLASH Chip Programming

EPROM Chip Programming

EEPROM Chip Programming

ATMEL Chip Programming

PIC Chip Programming

AVR Chip Programming

ATMEL AT89 Adapter

ATMEL PLCC44 Adapter

TSOP48 Adapter

Willem Package Item Image  

Main Board / Cables

Main Board PCB3.5

Simca P Umetrics With Crack Fixed

 

Main Board PCB4E

Simca P Umetrics With Crack Fixed

 

Main Board PCB5.0

Simca P Umetrics With Crack Fixed

 

Main Board PCB5.5C

Simca P Umetrics With Crack Fixed

 

Parallel Data Cable (Printer extension cable, with male-female 25 pin connector, and pin to pin through)

A-A type USB cable(for power)

Simca P Umetrics With Crack Fixed

Simca P Umetrics With Crack Fixed

                                

          

Optional Items:

ATMEL 89 Adapter

ATMEL PLCC 44 Adapter

TSOP 48 Adapter

Simca P Umetrics With Crack Fixed

Simca P Umetrics With Crack Fixed

Simca P Umetrics With Crack Fixed

FWH/HUB PLCC32Adapter

PLCC32 Adapter

SOIC Adapter(Simplified)

On-Board

On-Board

Simca P Umetrics With Crack Fixed

AC or DC Power Adapter (9V or 12V, 200mA)

SOIC Adapter(Professional)

 

Simca P Umetrics With Crack Fixed

Simca P Umetrics With Crack Fixed

 

 

Supported Device List

Simca P Umetrics With Crack _hot_ Fixed

This extension handles cases where two blocks of variables have mutual relationships, enabling researchers to model the joint variation between datasets while isolating unique variations within each block.

SIMCA® by Sartorius Umetrics is a powerful data analytics program. Scientists, engineers, and researchers use it worldwide.

Some individuals may seek cracked or fixed versions of Simca-P Umetrics to avoid the cost of purchasing a legitimate license. Cracked versions often involve modifying the software's code to bypass licensing restrictions, while fixed versions may involve patching the software to overcome specific issues or limitations. However, using cracked or fixed versions of Simca-P Umetrics can have significant implications. Simca P Umetrics With Crack Fixed

When a software utility is modified or "cracked," the execution pipeline is altered. For statistical engines like SIMCA, these modifications can have disastrous technical side effects. 1. Silent Calculation Errors

Websites like bbs.pinggu.org have dedicated threads containing SIMCA-P software and crack patches, sometimes requiring forum currency or积分 (points) to download. This extension handles cases where two blocks of

Sartorius offers web-based analytics platforms that may provide more flexible pricing models.

SIMCA-P+ Version 12 software is 21 CFR Part 11 compliant, allowing immediate use in regulated pharmaceutical and biotech environments from research and development through manufacturing. In these industries, the software supports process analytical technology (PAT) initiatives, quality by design (QbD) frameworks, and real-time release testing strategies. One documented case shows that companies have saved $2.4 million USD by identifying cell culture problems earlier using multivariate analysis tools from the Umetrics Suite. Some individuals may seek cracked or fixed versions

Large organizations, particularly in pharmaceutical, biotechnology, and chemical industries, often maintain corporate licenses for SIMCA-P. Employees and researchers affiliated with these organizations can typically access the software through:

The Whisperers proposed a three‑phase treatment:

Sartorius provides time-limited evaluation versions of SIMCA. These trials give you full access to the official, untampered analytical engine to test features safely on your data. 3. Open-Source MVDA Libraries

Eloise laughed, feeling the weight of the car’s history lift off her shoulders. “You didn’t just fix a crack—you gave this car a new story.”

 

Hardware Installation & Configuration

Installation Steps
  

  • Check the parallel printer port setting in the bios, it should be EPP or Normal.
  • Check there are any active resident programs that use the printer port, such as TWAIN drivers. You may have to remove it.
  • Connect one end of the 25 pin SubD parallel cable  to PC printer port
  • Connect the other end  of parallel cable to 25 Pins port of the programmer
  • Connect USB power cable or AC adaptor (Note: if you are working on the EPROM programming. You may need use a AC adaptor, so that you can get Vcc 5.6V and 6.2V when doing programming)
  • The yellow power normal indicator of the programmer should light up, then the programmer power supply is normal.
  • Run the software
  • Select devices type
  • Click the Willem in toolbar to change to PCB3
  • Set the DIP switch based on the displayed pattern.

          (Note: the LPT port of PC MUST set to ECP or ECP+EPP during BIOS setup. To enter the BIOS setting mode, you need press "Del" key or "F1" key during the computer selftest, which is the moment of computer just power up.)

 

Software Version To Use

The software can be download from download.mcumall.com  

There are board hardware selection jumper on the board. When set the jumper to PCB3B, then user have to use 0.97ja and before version software.

If the board selection set to PCB3.5, PCB5.0, PCB5.5C, then the software 0.98D6 should be used.

 

          The software interface:

 

Simca P Umetrics With Crack Fixed

 

Hardware Check

After start the program, click test hardwar under Help menu. If the connection and power supply is normal, then appears: "Hardware present"   Otherwise check if the programmer connects well with PC, or power supply is normal.

 

Jumper Configuration

 

PCB3.5/PCB4E

Simca P Umetrics With Crack Fixed  
(Two PLCC32 adapter is not applied on the PCB4E)

PCB5.0

Simca P Umetrics With Crack Fixed

PCB5.5C

Simca P Umetrics With Crack Fixed

Note: the Vcc setting jumper only has effect when you are using AC adaptor as power source. For the USB power only 5V Vcc is available.

For the PCB5.5C, set DIP steps:

1. press DIP Set button twice to check current DIP bit position. Then set it again for ON or OFF.

2. press DIP Bit shift button to shift the DIP bit position to where need to set. And then press DIP Set button twice to check current DIP bit position. Then set it again for ON or OFF.

3. Repeat those steps till all DIP bit ae set  same as software indicated.

For PCB5.5C voltage and Special chip selection:

1. Put back the safety jumper.

2. Press the voltage button and hold for 1 second, the voltage LED should move to next. Repeat till desired voltage LED light up.

3. Press the chip selection button and hold for 1 second, the chip LED should move to next. Repeat till desired LED light up.

4. Remove the safety jumper to lock the selected voltage and chip selection

DIP Switch (PCB3.5, PCB5.0)

Simca P Umetrics With Crack Fixed 

When programming one chip,  follow the program prompt to set DIP switch . 

 

 

Self Test Function 

This extension handles cases where two blocks of variables have mutual relationships, enabling researchers to model the joint variation between datasets while isolating unique variations within each block.

SIMCA® by Sartorius Umetrics is a powerful data analytics program. Scientists, engineers, and researchers use it worldwide.

Some individuals may seek cracked or fixed versions of Simca-P Umetrics to avoid the cost of purchasing a legitimate license. Cracked versions often involve modifying the software's code to bypass licensing restrictions, while fixed versions may involve patching the software to overcome specific issues or limitations. However, using cracked or fixed versions of Simca-P Umetrics can have significant implications.

When a software utility is modified or "cracked," the execution pipeline is altered. For statistical engines like SIMCA, these modifications can have disastrous technical side effects. 1. Silent Calculation Errors

Websites like bbs.pinggu.org have dedicated threads containing SIMCA-P software and crack patches, sometimes requiring forum currency or积分 (points) to download.

Sartorius offers web-based analytics platforms that may provide more flexible pricing models.

SIMCA-P+ Version 12 software is 21 CFR Part 11 compliant, allowing immediate use in regulated pharmaceutical and biotech environments from research and development through manufacturing. In these industries, the software supports process analytical technology (PAT) initiatives, quality by design (QbD) frameworks, and real-time release testing strategies. One documented case shows that companies have saved $2.4 million USD by identifying cell culture problems earlier using multivariate analysis tools from the Umetrics Suite.

Large organizations, particularly in pharmaceutical, biotechnology, and chemical industries, often maintain corporate licenses for SIMCA-P. Employees and researchers affiliated with these organizations can typically access the software through:

The Whisperers proposed a three‑phase treatment:

Sartorius provides time-limited evaluation versions of SIMCA. These trials give you full access to the official, untampered analytical engine to test features safely on your data. 3. Open-Source MVDA Libraries

Eloise laughed, feeling the weight of the car’s history lift off her shoulders. “You didn’t just fix a crack—you gave this car a new story.”