Re-partition Operation Failed. Odin [Premium ›]

The firmware package lacks a Partition Information Table (PIT) file required to re-map the storage.

To ensure your next attempt goes smoothly, keep this quick checklist in mind: Laptop/PC is connected to a stable power source. Samsung USB Drivers are updated to the latest version. re-partition operation failed. odin

If you have attempted all of the methods above, used different cables, tried different USB ports, and verified your firmware is correct, the issue may stem from physical hardware failure. Over time, the NAND flash memory chips in smartphones wear out. When bad sectors develop in the partition tables, software like Odin is physically blocked from re-writing the storage blocks. The firmware package lacks a Partition Information Table

For 95% of users, however, the solution is quick: uncheck the box, use a good USB 2.0 cable, and re-flash the correct firmware. Your Galaxy device will be back to life in minutes. If you have attempted all of the methods

The "Re-Partition operation failed" message is frightening, but it is usually a software mismatch issue. Take a deep breath, double-check your model number against the firmware file, ensure you aren't using Home CSC, and always run Odin as an Administrator.

Re-partitioning is a low-level operation. If your USB cable is loose, the port is dirty, or the drivers on your Windows PC are conflicting, the transfer of the PIT file will be interrupted. Because the operation involves rewriting the partition table, any interruption causes Odin to abort the process immediately to prevent permanent bricking.