Technology
5 min read
Evoko Liso Factory Reset Verified //top\\ 【VALIDATED · 2025】
Authenticate using your dedicated Admin PIN code or by swiping an authorized Administrator RFID card.
If the device is still booting but failing to connect to the server, you can try an "Admin Reset" first: Tap the screen and select the (menu). Click "Admin Login."
Even with careful preparation, issues can arise. This table outlines common problems and their solutions:
: If you do not interact, the flash will start automatically after 30 seconds.
Insert your paperclip into the pinhole and hold down the internal button.
This guide provides for performing a hard factory reset on the Evoko Liso to restore it to its default, out-of-the-box state. Why Perform a Factory Reset on an Evoko Liso?
Different Evoko corporate workspace products leverage vastly different engineering designs to execute system purges: How do I perform a firmware reset on an Evoko Liso?
This procedure completely flashes the device, erasing all locally stored data and settings. 1. Prepare the USB Drive Format a USB drive to . Download the official Evoko Liso firmware image file.
Ensure the drive is formatted strictly to FAT32, not NTFS or exFAT. Some high-capacity USB 3.0/3.1 drives draw too much power; try an older USB 2.0 drive if the Liso fails to read it.
Re-insert the PoE network connection link or power cable to initialize the motherboard startup.
WiFi credentials or static IP settings.
Would you like the steps for reconfiguring the Liso the reset (e.g., connecting to Office 365 / Exchange)?
Performing a factory reset on your Evoko Liso device can resolve a range of issues and get your device up and running smoothly. We've verified two methods for resetting your device, and with this guide, you should be able to successfully reset and reconfigure your Evoko Liso device. If you encounter any issues or have further questions, don't hesitate to contact Evoko support or consult your user manual.
While holding the button, plug the power source (PoE or DC) back into the device.
Use short presses to scroll down to . Long-press to select it.
Extract and copy the firmware files directly to the root directory of the USB drive. Do not place them in a folder.