Perform these system validations before opening the lanes to the public:
The Gunnebo SpeedStile FL is a premium speed gate designed to combine sleek aesthetics with reliable security access control. Proper installation ensures optimal performance, minimal wear, and long-term operational safety. This comprehensive guide outlines the complete installation process for technicians, integrators, and facilities managers. 1. Pre-Installation Planning & Site Requirements
Tighten the clamping bolts gradually in a cross-pattern to distribute pressure evenly across the glass interface.
This technical guide serves as an installation manual. It covers everything from site preparation to final testing for the Gunnebo SpeedStile FL series. 1. Pre-Installation and Site Requirements gunnebo speedstile fl installation manual
Gunnebo SpeedStile FL Installation Manual: The Complete Integration Guide
The of your SpeedStile FL (e.g., FL EV, FL sbe)?
Before powering the electronics for the first time, follow these safety notes: Perform these system validations before opening the lanes
Use a laser level or string line to ensure all cabinets are perfectly parallel and aligned along the front edge. Misalignment will cause optical sensor faults. 4. Mechanical Anchoring and Leveling
Ensure the conduits protrude between 30 mm and 50 mm above the finished floor level. Conduit A (Power): 25 mm diameter for AC mains power.
The installation follows a sequential process to ensure physical stability and alignment. It covers everything from site preparation to final
All electrical connections must be performed by a qualified electrician in compliance with local electrical codes. Mains Power Connection
Check the status LEDs on the optical sensor array. All infrared beams should show a "Clear" status when the lane is unobstructed.
Terminate the reader relay output across the designated GND and Open A terminals.