Phison Mpall V3.70.0e Jun 2026

Using MPALL software involves risk. It can permanently damage your USB drive if configured incorrectly. You assume all responsibility for its use.

You cannot simply download MPALL and hit "Start." You must first verify that your USB drive actually uses a supported Phison controller chip.

Note that the serial number . If the number is too short, the program will lengthen it automatically or ignore the setting. You can either edit the INI file directly in a text editor or use the MPParamEdit_F1.exe configuration tool by switching to "Advanced Setting" and entering the parameter in the "Other Setting" tab.

Phison MPALL v3.70.0e is not a tool for casual users. It is a specialized utility that serves a critical function for a shrinking group of legacy hardware. Its value lies in its ability to perform low-level repairs that are impossible with standard operating system tools. Before using it, accurately identify your flash drive's controller, prepare a compatible Windows 7 environment, and carefully configure the tool's settings. If all these conditions are met, MPALL v3.70.0e can successfully revive a "bricked" flash drive. Phison Mpall V3.70.0e

Follow these steps to configure a standard recovery run using Phison MPALL v3.70.0E: Step 1: Run the Executable

MPALL v3.70.0e works on Phison controllers. Using it on a drive with a Silicon Motion (SMI), Alcor, or Realtek chip will fail and could permanently damage the device.

Right-click and select Run as Administrator . Using MPALL software involves risk

If MPALL does not detect the drive at all, the controller might be dead, but you can try to "short the NAND pins" on the USB stick to force it into safe mode (Test Mode) before trying MPALL.

Download a free hardware diagnostic tool like or Flash Drive Information Extractor (Flash Drive Information Extractor) .

Do not use MPALL without knowing your controller. Use a utility like or ChipGenius to determine the exact Controller Part Number (e.g., PS2251-03, PS2251-50, PS2251-67, PS2251-70). 2. Operating System Compatibility You cannot simply download MPALL and hit "Start

is a highly specialized, low-level mass production tool (MPTool) designed to format, configure, and reflash flash drives built on Phison controllers. When a USB drive suffers from severe corruption—such as becoming "Write Protected," showing "No Media," or exhibiting a completely unrecognized file system—standard Windows formatting utilities usually fail. Hardware enthusiasts and repair technicians rely on tools like Phison MPALL v3.70.0E to bypass consumer-level blocks, upload fresh firmware, and restore broken storage devices to a fully operational state. 🛠️ Supported Hardware and Controllers

Do not guess your controller version. Download an informational utility like Flash Drive Information Extractor (ChipEasy) or . Plug in your broken drive and document the following parameters: Controller Model (e.g., PS2251-07) Flash ID (FID) (e.g., 98 DE 98 92) Current VID / PID (Typically 13FE for Phison) 2. Match the Software Files

Disable antivirus software, as it often detects these low-level tools as false positives.

In the configuration window, adjust these settings based on your Flash Drive Information Extractor results: