Connecting you to Singapore's master practitioners of serenity.
Turn on your phone's Bluetooth and Location Services to assist in device discovery. 3. Pairing the Camera to Your Phone
Tuck exposed wiring into a weatherproof junction box to prevent water damage and wire degradation. Troubleshooting Guide for Common Issues Issue 1: The Camera Shows "Offline" Status
Hold steady until you hear a confirmation beep or voice prompt indicating a successful scan.
When prompted by your operating system, grant the app permission to access your Location , Local Network , Camera , and Microphone . These permissions are technically required for discovering and syncing with the hardware. 4. Connecting Your Camera to Wi-Fi (QR Code Method) zclever security camera manual new
Name your camera (e.g., "Front Door") to complete the setup. 🛠️ Mounting and Physical Installation
[ Antenna ] (For Wi-Fi models) | +----+----+ | | +----+ Lens +----+ | [] (Center) [] | <-- Infrared (IR) LEDs +----+ +----+ | O | <-- Microphone / Motion Sensor +----+----+ | [ Bracket ] | (Cable Bundle: Power, Ethernet, Reset Button)
Opt for a Zclever cloud plan within the app for encrypted, off-site storage. This ensures recordings are saved even if the camera is destroyed or stolen. 6. Maintenance & Troubleshooting Troubleshooting Common Issues: Turn on your phone's Bluetooth and Location Services
: Insert your navigation mouse into an available USB utility slot. Connect an Ethernet cable from your network router to the WAN/LAN network port on the back of the recorder.
ZClever Security Camera Manual: A New Guide to Setup and Support Setting up your ZClever security camera
Important Note: Zclever cameras typically support 2.4GHz Wi-Fi networks only. Ensure your phone is connected to 2.4GHz during setup. Troubleshooting Guide for Common Issues Issue 1: The
: Connect the NVR/DVR to a monitor or TV using an HDMI or VGA cable to see the local interface.
Select "Add Device" and use the QR code scanner within the app to scan the Serial Number (SN) found in the DVR's "System Info" or "Version" menu. Remote Viewing Issues : If the app fails to connect, verify that Port Forwarding for HTTP and server ports is enabled on your router. 3. Camera Controls and Navigation
Avoid placing cameras facing direct sunlight or intense reflective surfaces. 4. Key Features & Camera Settings
: For Wi-Fi models, wait for the LED indicator to blink (usually blue or white), which signifies the camera is ready for pairing. 2. Connecting to the Mobile App