Nokia 7250 Ixr X1 Installation Guide -

Proper grounding protects the equipment from electrical surges, lightning strikes, and static buildup.

This guide will walk you through the entire installation process, from unpacking the device to bringing the network online.

Connect a standard Cat5e or Cat6 Ethernet cable to the RJ-45 MGMT port for out-of-band IP management. Optical Transceivers (SFP+/QSFP28): nokia 7250 ixr x1 installation guide

tools system deploy-image http://10.10.10.200/images/srlinux-24.10.1.bin reboot

Observe minimum bend radius guidelines for all fiber optic lines to prevent signal attenuation. 7. Initial Bootstrap and Software Configuration System is ready

Welcome to Nokia SR Linux. System is ready.

configure system security user "admin" password "YourNewSecurePassword123!" exit exit management-interface address 192.168.1.10/24 static-routes route 0.0.0.0/0 next-hop 192.168.1.1 exit no shutdown exit exit admin save Use code with caution. independent AC power sources.

Connect an RJ-45 Ethernet cable to the dedicated Management (MGMT) port for out-of-band management access.

The 7250 IXR X1 supports two primary methods for initial software installation:

Before unpacking and installing the 7250 IXR X1, complete the following preparatory steps.

Connect the power cords to separate, independent AC power sources.