The cooling fan is blocked or disconnected. Clean the vents or replace the fan.
Battery is critically discharged. Allow the grid or solar panels to recharge the battery. Output Short Circuit
Mount on a solid, non-combustible surface (like concrete). Clearance: Maintain a clearance of at least on the sides and above/below for heat dissipation. Position: Install at eye level to monitor the display. Wiring Connections Veyron 1.2-2.5KW Inverter User Manual | PDF - Scribd
The Veyron 1.2KW (also known as Veyron II 1200) is designed for small-scale residential use, supporting loads like fans, lighting, and computers. Power Efficiency : Features a 1.0 Power Factor , ensuring maximum energy conversion from solar panels. Solar Capacity : Supports a maximum PV array power of with a wide MPPT operating range of 30–300 VDC Battery Compatibility inverex veyron 1.2 user manual pdf
Inverex Veyron 1.2 kW is a hybrid MPPT solar inverter designed for residential and light commercial use, primarily marketed in Pakistan
| | Specification | | :------------------------------------ | :-------------------------------------------------- | | Model | Veyron II 1200-12 | | Rated Power | 1200W | | Surge Power (Peak) | 2000 VA | | Waveform | Pure Sine Wave | | AC Voltage Regulation (Battery Mode) | 230 VAC ± 5% | | Transfer Time | 10 ms (PCs) / 20 ms (Home Appliances) | | Peak Efficiency | 90% ~ 93% | | Input Voltage | 230 VAC | | Selectable Voltage Range | 170–280 VAC (PCs) / 90–280 VAC (Home Appliances) | | Frequency Range | 50 Hz/60 Hz (Auto‑sensing) | | Battery Voltage | 12 VDC | | Floating Charge Voltage | 13.5 VDC | | Overcharge Protection | 16 VDC | | Solar Charger Type | MPPT (Maximum Power Point Tracking) | | Max. PV Array Power | 2000W | | Max. PV Array Open Circuit Voltage | 350 VDC | | MPP Range @ Operating Voltage | 60 – 300 VDC | | Max. Solar Charge Current | 80A | | Max. AC Charge Current | 80A | | Dimensions (D x W x H) | 95 x 288 x 357 mm | | Net Weight | 9 kg | | Communication Interface | RS232 | | Operating Temperature | -10°C to 50°C | | Storage Temperature | -15°C to 60°C | | Humidity | 5% to 95% RH (Non‑condensing) |
The official provides:
Enable (LFED) or disable (LFD) auto-restart when an overload trip occurs. ⚠️ Common Error Codes & Troubleshooting
By combining the practical insights from this article with the precise instructions in the official manual, you will be well-equipped to harness the full potential of your Veyron 1.2, ensuring a reliable, efficient, and cost-effective solar experience for years to come.
Install the unit indoors away from direct sunlight, moisture, and excessive dust. Battery Connection The cooling fan is blocked or disconnected
Solar power is the primary source. If PV energy is low, the grid supplements the power needed for your appliances. Battery Priority Configurations
12VDC (requires a single 12V battery bank configuration)
I went to , navigated to Products → Solar Inverters → Veyron Series . The 1.2kW model had a “Downloads” tab — but only a datasheet and warranty card, no manual PDF. Common issue. Allow the grid or solar panels to recharge the battery
provides 44 pages of detailed instructions on assembly, settings, and troubleshooting.
The is a cutting‑edge hybrid energy solution designed for both residential and small‑scale commercial use. As part of the Veyron II series, this inverter is notable for being Pakistan’s first inverter that can function efficiently without a battery , offering users unprecedented flexibility in energy management.