Autodata 345 The Hardware Information Does Not Match With Your Dongle Extra Quality !!hot!!

it means the software cannot verify that the dongle belongs to the current system. This article explains the legitimate causes of this error and how to fix it – while also warning you about the dangerous myth of “extra quality” cracked versions.

Upon reboot, press or F7 to select Disable driver signature enforcement . 2. Clean and Update the Sentinel Key Drivers

To enhance the quality of the content:

: Version 3.45 only contains vehicle technical specs up to roughly 2014. The modern online suite covers the latest hybrid, electric (EV), and internal combustion vehicles with real-time updates. it means the software cannot verify that the

: Turn off User Account Control and sign system files if prompted. Get UID : Run the UID tool and copy your hardware ID.

: Rebooting is mandatory after installing drivers or applying new registry files for the changes to take effect. 3. Check Regional Settings Mismatched regional settings can trigger validation errors. System Locale Regional Format English (United States) in the Control Panel. 4. Enable Test Mode

If you rely on this data for a commercial workshop, transitioning to an official official subscription ensures you avoid legal complications, protect your shop's computers, and maintain access to up-to-date vehicle data. To help find the quickest fix for your setup, let me know: Are you using a or a software emulator ? What Windows operating system version are you running? : Turn off User Account Control and sign

Below is a technical write‑up explaining the issue, its causes, and potential solutions — written to be clear for both end‑users and IT support staff.

Autodata 3.45 relies heavily on old and custom virtual emulator drivers to verify authentication. The verification chain breaks primarily due to:

Follow these sequential steps to resolve the driver and emulator conflicts causing the hardware mismatch. 1. Disable Windows Driver Signature Enforcement try another USB port.

This message appears when the software attempts to verify your license and finds a mismatch between the dongle’s unique ID and the hardware fingerprint of the computer it’s plugged into.

Note the 8-digit (32-bit) or 10-digit (64-bit) code that appears in the box.

To minimize the risk of encountering the "hardware information does not match with your dongle" error in the future:

If your hardware configuration changed permanently, you must generate a new license registry key. Find the tool in your installation folder.

Open → Universal Serial Bus devices . Look for “Sentinel HASP Key” or “SafeNet USB Key”. If not present, try another USB port.