Mikrotik Router Quick Setup Link -

First Time Configuration - RouterOS - MikroTik Documentation

: Best used only once from a clean factory reset; subsequent runs may not overwrite existing manual tweaks correctly.

The Quick Setup web interface is accessible via the default LAN IP address:

This requires your computer to be in the 192.168.88.0/24 subnet (e.g., IP 192.168.88.2 , netmask 255.255.255.0 ). mikrotik router quick setup link

If the web link completely fails, download Winbox from the official MikroTik website. Winbox is a lightweight software tool that can discover and connect to MikroTik routers via their hardware MAC address, bypassing IP communication entirely. Next Steps After Quick Setup

Change this from the default "MikroTik" to your preferred home or business Wi-Fi name.

This section configures your home network. If you have a different router or modem using 192.168.88.1 , you may want to change the router's IP address here to avoid a conflict. However, the default IP is fine for initial configuration. Leave enabled so your devices automatically get IP addresses. First Time Configuration - RouterOS - MikroTik Documentation

Plug the power adapter into your MikroTik router and connect it to an electrical outlet. Wait about 30 to 60 seconds for the device to boot up. You will usually hear a single or double beep indicating it is ready.

Winbox will scan your local network and list your MikroTik router, showing its MAC address and IP address.

is enabled (this automatically hands out IP addresses to your phones, TVs, and computers). Winbox is a lightweight software tool that can

Once you hit enter, you will see a login screen.

Here is the direct link and a quick guide on how to use the MikroTik Quick Setup interface.